Specificaties
- High strength, good toughness
- Low density: when printing larger volume – the model is lighter
- Can be applied to a variety of 3D printers
Specifications |
|
|---|---|
| Material: ABS, 1.75 mm diameter | |
| Weight: 1 kg/spool (2.2 lbs) | |
| Length: approx. 400 m | |
| Density at 21.5?C: 1.01 g/cm3 | |
| Melt Flow Index at 10min, 2.16kg: 5 | |
| Melt Point: 225 – 240 ?C | |
| Heat-Deflection-Temperature at 0.455 MPa: 85 ?C | |
| Yield Strength at 5mm/min: 45 MPa | |
| Impact Strength: 16 KJ/m2 | |
| Ensile Break: 30 % | |
| Diameter: 1.75 ± 0.05 mm | |
| Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole | |
System requirements |
|---|
| A 3D printer with 1.75 mm extruder of temperature around 230 ?, suitable for use with ABS filament |
Specificaties
- High strength, good toughness
- Low density: when printing larger volume – the model is lighter
- Can be applied to a variety of 3D printers
Specifications |
|
|---|---|
| Material: ABS, 1.75 mm diameter | |
| Weight: 1 kg/spool (2.2 lbs) | |
| Length: approx. 400 m | |
| Density at 21.5?C: 1.01 g/cm3 | |
| Melt Flow Index at 10min, 2.16kg: 5 | |
| Melt Point: 225 – 240 ?C | |
| Heat-Deflection-Temperature at 0.455 MPa: 85 ?C | |
| Yield Strength at 5mm/min: 45 MPa | |
| Impact Strength: 16 KJ/m2 | |
| Ensile Break: 30 % | |
| Diameter: 1.75 ± 0.05 mm | |
| Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole | |
System requirements |
|---|
| A 3D printer with 1.75 mm extruder of temperature around 230 ?, suitable for use with ABS filament |
