Flashforge PLA Red, 1.75 mm, 0.6 kg

Flashforge PLA Red, 1.75 mm, 0.6 kg

€24.99 €20.65 ex.btw

Beschikbaar via nabestelling

Artikelnummer: FF-3DP-PLA1.75-02-R

Categorieën:
Flashforge PLA Red, 1.75 mm, 0.6 kg

Flashforge PLA Red, 1.75 mm, 0.6 kg

€24.99 €20.65 ex.btw

Beschikbaar via nabestelling

Artikelnummer: FF-3DP-PLA1.75-02-R

Categorieën:

Specificaties

  • VERSATILE & EASY TO USE
  • PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.
  • It has no odor, a lower melting point and good flowbility, no need to post-treatment.
Specificaties
Material: PLA, 1.75 mm diameter
Weight: 0.6 kg/spool
Density at 215°C: 1.24 g/cm3
Melt Flow Index at g/10min, 190°C/ 2.16kg: 6
Melt Point: 190 – 220 °C
Heat-Deflection-Temperature at 0.455 MPa: 50 °C
Yield Strength at 5mm/min: 62 MPa
Impact Strength: 4.2 KJ/m2
Ensile Break: 15 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 160mm diameter x 53mm height x 32mm central hole
Systeemeisen
A 3D printer with 1.75 mm extruder of temperature around 200 °C, suitable for PLA filament

Specificaties

  • VERSATILE & EASY TO USE
  • PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.
  • It has no odor, a lower melting point and good flowbility, no need to post-treatment.
Specificaties
Material: PLA, 1.75 mm diameter
Weight: 0.6 kg/spool
Density at 215°C: 1.24 g/cm3
Melt Flow Index at g/10min, 190°C/ 2.16kg: 6
Melt Point: 190 – 220 °C
Heat-Deflection-Temperature at 0.455 MPa: 50 °C
Yield Strength at 5mm/min: 62 MPa
Impact Strength: 4.2 KJ/m2
Ensile Break: 15 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 160mm diameter x 53mm height x 32mm central hole
Systeemeisen
A 3D printer with 1.75 mm extruder of temperature around 200 °C, suitable for PLA filament

Gerelateerde producten