Specificaties
- FILAMENT FOR FINDER, DREAMER & INVENTOR 3D PRINTERS
- Filament spool met filament detection sensor voor Flashforge Finder, Dreamer _ Inventor 3D printers
| Specificaties | |
|---|---|
| Material: PLA, 1.75 mm diameter | |
| Weight: 0.6 kg/spool | |
| Density at 215°C: 1.24 g/cm3 | |
| Melt Flow Index at g/10min, 190°C/ 2.16kg: 6 | |
| Melt Point: 190 – 220 °C | |
| Heat-Deflection-Temperature at 0.455 MPa: 50 °C | |
| Yield Strength at 5mm/min: 62 MPa | |
| Impact Strength: 4.2 KJ/m2 | |
| Ensile Break: 15 % | |
| Diameter: 1.75 ± 0.05 mm | |
| Spool dimensions: 160mm diameter x 53mm height x 32mm central hole | |
| Systeemeisen |
|---|
| A 3D printer with 1.75 mm extruder of temperature around 200 °C, suitable for PLA filament |
Specificaties
- FILAMENT FOR FINDER, DREAMER & INVENTOR 3D PRINTERS
- Filament spool met filament detection sensor voor Flashforge Finder, Dreamer _ Inventor 3D printers
| Specificaties | |
|---|---|
| Material: PLA, 1.75 mm diameter | |
| Weight: 0.6 kg/spool | |
| Density at 215°C: 1.24 g/cm3 | |
| Melt Flow Index at g/10min, 190°C/ 2.16kg: 6 | |
| Melt Point: 190 – 220 °C | |
| Heat-Deflection-Temperature at 0.455 MPa: 50 °C | |
| Yield Strength at 5mm/min: 62 MPa | |
| Impact Strength: 4.2 KJ/m2 | |
| Ensile Break: 15 % | |
| Diameter: 1.75 ± 0.05 mm | |
| Spool dimensions: 160mm diameter x 53mm height x 32mm central hole | |
| Systeemeisen |
|---|
| A 3D printer with 1.75 mm extruder of temperature around 200 °C, suitable for PLA filament |
