Specificaties
- Geperfectioneerde ronde vorm voor hoge printkwaliteit zonder vastlopen Met PLA kunnen alle vormen worden geprint en komen details goed tot hun recht Geschikt voor verschillende modellen en merken 3D printers Geen verwarmd printplatform (hot bed) nodig
Specificaties |
|
|---|---|
| Material: PLA, 1.75 mm diameter, 35% recycled wood | |
| Weight: 1 kg/spool (2.2 lbs) | |
| Length: approx. 330 m | |
| Length: approx. 120 m | |
| Density at 215°C: 1.24 g/cm3 | |
| Melt Flow Index at g/10min, 190°C/ 2.16kg: 6 | |
| Melt Point: 190 – 220 °C | |
| Heat-Deflection-Temperature at 0.455 MPa: 50 °C | |
| Yield Strength at 5mm/min: 62 MPa | |
| Impact Strength: 4.2 KJ/m2 | |
| Ensile Break: 15 % | |
| Diameter: 1.75 ± 0.05 mm | |
| Spool dimensions: 160 mm diameter x 53 mm height x 32 mm central hole | |
Systeemeisen |
|---|
| A 3D printer with 1.75 mm extruder of temperature around 200 ℃C, suitable for PLA filament |
Specificaties
- Geperfectioneerde ronde vorm voor hoge printkwaliteit zonder vastlopen Met PLA kunnen alle vormen worden geprint en komen details goed tot hun recht Geschikt voor verschillende modellen en merken 3D printers Geen verwarmd printplatform (hot bed) nodig
Specificaties |
|
|---|---|
| Material: PLA, 1.75 mm diameter, 35% recycled wood | |
| Weight: 1 kg/spool (2.2 lbs) | |
| Length: approx. 330 m | |
| Length: approx. 120 m | |
| Density at 215°C: 1.24 g/cm3 | |
| Melt Flow Index at g/10min, 190°C/ 2.16kg: 6 | |
| Melt Point: 190 – 220 °C | |
| Heat-Deflection-Temperature at 0.455 MPa: 50 °C | |
| Yield Strength at 5mm/min: 62 MPa | |
| Impact Strength: 4.2 KJ/m2 | |
| Ensile Break: 15 % | |
| Diameter: 1.75 ± 0.05 mm | |
| Spool dimensions: 160 mm diameter x 53 mm height x 32 mm central hole | |
Systeemeisen |
|---|
| A 3D printer with 1.75 mm extruder of temperature around 200 ℃C, suitable for PLA filament |
