Specificaties
High quality indoor coax cable. Easy recognizable blue dielectric. High op mised triple shielding. Protects against 4G (LTE) signals. Highly exible for easy installa on. Low return loss. The outer tape doesn’t conduct; when connec ng connector or outlet the outer tape has to be removed. The cable has a meter counter for easier length measurement.
Specificaties
75 Ohm digital coaxial cable used in indoor applica on, HFC/CATV signal distribu on. Foamed-PE dielectric, stable impedance, high shielding performance.
Applica on
Structural speci ca on
Inner conductor Dielectric
Outer Shield
Sheath
Operating temperature Installation temperature Maximum pulling tension Min. bending radius
Mechanical specification
-40 0C to +70 0C -5 0C to +50 0C
Electrical specification (at 20 0C) Characteristic impedance Nominal capacitance
Velocity ratio
75 Ohm
52 pF/m 0.85
5 KV, ac inner cond. outer cond.
1.5 dB / 100 m 17.2 dB / 100 m 25.1 dB / 100 m 28.2 dB / 100 m 33.6 dB / 100 m
> 110 dB > 105 dB > 95 dB
< 0.9 mOhm/m
Sheath spark test DC resistance
< 18 Ohm/km < 11 Ohm/km
Attenuation
5 MHz 860 MHz 1750 MHz 2150 MHz 3000 MHz
Screening attenuation
30 – 1000 MHz 1000 – 2000 MHz 2000 – 3000 MHz
Transfer impedance
5 – 30 MHz
Return loss
5 – 470 MHz
470 – 1000 MHz 1000 – 2000 MHz 2000 – 3000 MHz
Declaration of Performance
Bare copper wire, diameter 1.13 mm Physically foamed-PE, diameter 4.80 mm
1st. bonded to dielectric, 40/12 μm
1st. Braiding Tinned copper wire ≥ 80% coverage 2nd. Tape AI/PET/AI, 9-12-9 μm
White PVC UV resistant diameter 6.9 mm
> 27 dB > 24 dB > 18 dB > 16 dB
Year of first CE-marking Notified body Reference number European standard
Fire behavior
17
NB2479 DoP-HM-17100 EN 50575:2014 Eca
Specificaties
High quality indoor coax cable. Easy recognizable blue dielectric. High op mised triple shielding. Protects against 4G (LTE) signals. Highly exible for easy installa on. Low return loss. The outer tape doesn’t conduct; when connec ng connector or outlet the outer tape has to be removed. The cable has a meter counter for easier length measurement.
Specificaties
75 Ohm digital coaxial cable used in indoor applica on, HFC/CATV signal distribu on. Foamed-PE dielectric, stable impedance, high shielding performance.
Applica on
Structural speci ca on
Inner conductor Dielectric
Outer Shield
Sheath
Operating temperature Installation temperature Maximum pulling tension Min. bending radius
Mechanical specification
-40 0C to +70 0C -5 0C to +50 0C
Electrical specification (at 20 0C) Characteristic impedance Nominal capacitance
Velocity ratio
75 Ohm
52 pF/m 0.85
5 KV, ac inner cond. outer cond.
1.5 dB / 100 m 17.2 dB / 100 m 25.1 dB / 100 m 28.2 dB / 100 m 33.6 dB / 100 m
> 110 dB > 105 dB > 95 dB
< 0.9 mOhm/m
Sheath spark test DC resistance
< 18 Ohm/km < 11 Ohm/km
Attenuation
5 MHz 860 MHz 1750 MHz 2150 MHz 3000 MHz
Screening attenuation
30 – 1000 MHz 1000 – 2000 MHz 2000 – 3000 MHz
Transfer impedance
5 – 30 MHz
Return loss
5 – 470 MHz
470 – 1000 MHz 1000 – 2000 MHz 2000 – 3000 MHz
Declaration of Performance
Bare copper wire, diameter 1.13 mm Physically foamed-PE, diameter 4.80 mm
1st. bonded to dielectric, 40/12 μm
1st. Braiding Tinned copper wire ≥ 80% coverage 2nd. Tape AI/PET/AI, 9-12-9 μm
White PVC UV resistant diameter 6.9 mm
> 27 dB > 24 dB > 18 dB > 16 dB
Year of first CE-marking Notified body Reference number European standard
Fire behavior
17
NB2479 DoP-HM-17100 EN 50575:2014 Eca
